USB Hubi

CANYON hub DS-02 4in1 USB-A/C Green

Kods: CNS-TDS02GR

USB Hubi

AXAGON Miniature metal four-port USB 3.2 Gen 1 hub , HUE-M1A

Kods: HUE-M1A

USB Hubi

USB 3.0 ports offer transfer speeds of up to 5Gbps, 10 times faster than standard USB 2.0 The 4 data transfer ports mean you don't have to switch between devices

Kods: UH400

USB Hubi

Miniature metal USB-C 3.2 Gen 1 hub AXAGON HUE-M1C fast and easy connects up to four USB devices to laptop or computer. The metal hub body is made of aluminum and provides perfect mechanical protection for frequent carrying. Elegant finely structured body surface against fingerprint. Rubber pads prevent slipping up on the table. Permanently fixed 20 cm long USB cable is ideal for users of mobile devices. This small travel hub can also handle the permanent connection of several external drives. Thanks to the fast USB 3.2 Gen 1 interface, the transfer speed is up to 5Gb/s. The hub will also charge phones and tablets with a current up to 1.5A/5V. So hub can easily charge an Android smartphone, Apple iPhone, Apple iPad etc. The USB hub is the ideal accessory for ultrabooks with a small number of USB-A ports. The hub does not even frighten to connect with phones USB-C connector. You can connect a flash drive, keyboard and mouse to your phone or tablet. Input: • 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector. • Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. • Compatible with Thunderbolt 3 interface. • Connecting USB type C male connector on a fixed 20 cm long cable. Output: • 4x SuperSpeed USB port, USB-A female connectors. • Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). • The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). • USB hub handle the permanent connection of several external drives. Features: • Possibility to connect your device while running thanks to the Hot Plug support. • Full Plug and Play support. • Sleep mode support. • The high quality shielded cable ensures high communication speed and minimal undesirable interference. • White LED indicates the connection to the computer's USB port. • Power supply via USB bus (USB bus power). • Dimensions 70 x 24 x 18 mm. • Weight 33 g (incl. cable). • USB cable length 20 cm. Power / Charging: • USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. • The USB hub can also handle the permanent connection of several external drives simultaneously. • Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2.8A at 5V (depending on the capabilities of the computer's USB port). Supported OS: • MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux with kernel 2.6.x and later, Android most versions. Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: • SuperSpeed USB-C hub with fixed 20 cm long USB cable, • printed installation manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, • packed in a cardboard box with a hanging hole.

Kods: HUE-M1C

USB Hubi

The four port AXAGON HUE-S2C USB 3.1 hub with optional external power and fast charging support on all ports. A lightweight small hub with elegant, matte plastic body connects quickly and easily up to four USB devices to your PC at one time. A great advantage is the possibility of external power supply from any mobile device charger with a micro USB connector. The unused charger thus makes this USB hub a fast-charging hub for free. Mobile phones, tablets, power banks and other devices can be charged up to 2A (depends on the charger used) in any hub port thanks to the USB Battery Charging 1.2 support. Supports charging of iPad tablets even without auxiliary power supply with approx. 1A (iPad mostly cannot be charged directly from the USB 3.0 ports on the PC). It can even handle permanent connection of several external disks without external hub power. When external power supply is connected, you can even work with three external disks at one time. The USB ports located across the hub body with sufficient spacing ensure seamless direct connection of large USB devices. A permanently attached USB cable with a sufficient length of 40 cm is ideal for use with laptops. It can also work as a separate charging hub and charge the USB devices from the power adapter even when the PC is turned off or disconnected. Features: • 4 downstream USB 3.0 ports with enough space around the connectors. • an upstream USB 3.1 Gen port with USB Type C male connector on a 40 cm long permanently attached cable. • Compatible with USB 3.0 and backward compatible with USB 2.0 and USB 1.1. • Supports transmission rates 1.5 / 12 / 480 / 5000 Mb/s (low / full / high / super speed). • Supports USB Battery Charging v 1.2 specification. • Each hub port can be used to charge up to 2A (with an external USB charger - not included). • Possibility to connect your device while running thanks to the Hot Plug support. • Full Plug and Play support. • LED indication of hub connection to power supply. • Current overload detection and protection. • Hub dimensions 96 x 32 x 22 mm. • Hub weight 49 g (incl. cable). The hub power mode via USB cable (bus power): • The USB bus power is sufficient to connect the USB device with a low power consumption (mouse, keyboard, card reader, flash disk, etc.) or own power supply (printer, scanner, 3.5" external disk) to all four ports. • In this power mode, the USB hub is also able to cope with up to two magnetic 2.5" external disks simultaneously. • Charging of mobile devices (including iPads) is also possible in this power mode, however, the charging current is only 0.9A, in some cases 1A (depending on the computer). The hub power mode via USB charger - not included (self power): • Any mobile device charger with micro USB connector (recommended output current of the charger 2A) can be used. • In this power mode, the USB hub is able to cope with three magnetic 2.5" external disks. However, we recommend that you connect max. two external 2.5" disks simultaneously for reliable long-term hub operation. • Fast charging of mobile devices (including iPads) up to 2A in each of the hub ports. The total current supplied by the hub during charging is limited by the output current of the external power adapter. Independent charging hub mode without being connected to the PC (charging hub): • After disconnecting the connected PC or without being connected to the PC the hub works with power supply via USB charger as a separate charging USB hub. • Fast charging of mobile devices (including iPads) up to 2A in each of the hub ports. The total current supplied by the hub during charging is limited by the output current of the external power adapter. OS support: • MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.4.x and higher, Linux with kernel 2.6.x and above. • Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: • USB 3.0 hub with permanently connected 40 cm long cable, • printed multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, • packed in a cardboard box.

Kods: HUE-S2C

USB Hubi

AXAGON Miniature metal four-port USB 3.2 Gen 1 hub , HUE-M1AL

Kods: HUE-M1AL

USB Hubi

The four port AXAGON HUE-S2BL USB 3.0 hub with a 1.2 m long USB cable, optional external power and fast charging support on all ports. A lightweight small hub with elegant, matte plastic body connects quickly and easily up to four USB devices to your PC at one time. The permanently attached 1.2 m long USB cable is suitable for use with a desktop computer. A great advantage is the possibility of external power supply from any mobile device charger with a micro USB connector. Any idle charger thus makes this USB hub a fast-charging hub for free. Mobile phones, tablets, power banks and other devices can be charged up to 2A (depends on the charger used) in any hub port thanks to the USB Battery Charging 1.2 support. Supports charging of iPad tablets even without auxiliary power supply with approx. 1A (iPad mostly cannot be charged directly from the USB 3.0 ports on the PC). It can even handle permanent connection of several external disks without external hub power. When external power supply is connected, you can even work with three external disks at one time. It can also work as a separate charging hub and charge the USB devices from the power adapter even when the PC is turned off or disconnected. The USB ports located across the hub body with sufficient spacing ensure seamless direct connection of large USB devices. Features: • 4 downstream USB 3.0 ports with enough space around the connectors. • an upstream USB 3.0 port with USB 3.0 Type A male connector on a 120 cm long permanently attached cable. • Compatible with USB 3.0 and backward compatible with USB 2.0 and USB 1.1. • Supports transmission rates 1.5 / 12 / 480 / 5000 Mb/s (low / full / high / super speed). • Supports USB Battery Charging v 1.2 specification. • Each hub port can be used to charge up to 2A (with an external USB charger - not included). • Possibility to connect your device while running thanks to the Hot Plug support. • Full Plug and Play support. • LED indication of hub connection to power supply. • Current overload detection and protection. • Hub dimensions 96 x 32 x 22 mm. • Hub weight 76 g (incl. cable). The hub power mode via USB cable (bus power): • The USB bus power is sufficient to connect the USB device with a low power consumption (mouse, keyboard, card reader, flash disk, etc.) or own power supply (printer, scanner, 3.5" external disk) to all four ports. • In this power mode, the USB hub is also able to cope with up to two magnetic 2.5" external disks simultaneously. • Charging of mobile devices (including iPads) is also possible in this power mode, however, the charging current is only 0.9 A, in some cases 1 A (depending on the computer). The hub power mode via USB charger - not included (self power): • Any mobile device charger with micro USB connector (recommended output current of the charger 2A) can be used. • In this power mode, the USB hub is able to cope with three magnetic 2.5" external disks. However, we recommend that you connect max. two external 2.5" disks simultaneously for reliable long-term hub operation. • Fast charging of mobile devices (including iPads) up to 2A in each of the hub ports. The total current supplied by the hub during charging is limited by the output current of the external power adapter. Independent charging hub mode without being connected to the PC (charging hub): • After disconnecting the connected PC or without being connected to the PC the hub works with power supply via USB charger as a separate charging USB hub. • Fast charging of mobile devices (including iPads) up to 2A in each of the hub ports. The total current supplied by the hub during charging is limited by the output current of the external power adapter. OS support: • MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 and later (supported are all 32 and 64-bit Windows OS versions), Mac OS X 10.4.x and higher, Linux with kernel 2.6.x and above. • Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. Package contains: • USB 3.0 hub with a permanently connected 120 cm long cable, • printed multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, • packed in a cardboard box.

Kods: HUE-S2BL

USB Hubi

4-port USB 3.2 (Gen 2) Type-C hub Stylish metal design USB 3.2 ultra-high data transfer speed up to 10 Gbps Suitable for USB Type-C OTG devices and PC

Kods: UHB-CM-U310-A4-01

USB Hubi

Vention 5-in-1 USB-C Hub Standard 5Gbps Transfer Speed 4 Ports for Expansion, No More Plugging and Unplugging Power Supply for 8TB External Hard Drive, Easy Data Access Power 2TB External Hard Drive Without Additional Power Supply Widely Compatible, Convenient and Reliable Compatible with Multiple Systems, Plug and Play

Kods: TGKBB

USB Hubi

4-port A + C USB 3.2 (Gen 2) Type-C hub Stylish metal design USB 3.2 ultra-high data transfer speed up to 10 Gbps Suitable for USB Type-C OTG devices and PC

Kods: UHB-CM-U310-A2C2-01

USB Hubi

Metal USB 3.2 Gen 1 (USB 3.0) hub AXAGON HUE-MSA connects up to four USB devices to laptop or computer. It also offers USB port shutdown and Charging hub feature. The metal hub body is made of aluminum and provides perfect mechanical protection for frequent carrying. Elegant finely structured body surface against fingerprint. Rubber pads prevent slipping up on the table. Permanently fixed 20 cm long USB cable is ideal for users of mobile devices. Each USB port can be turned off / on using the button. This makes it easy to disconnect unnecessary devices without having to disconnect them from the USB hub. Each USB-A port has a blue LED indicating port is turned on or off. After connecting the hub, all LEDs are on = ports are enabled, LED is off = port is disabled. The versatility of this USB hub is also enhanced by the built-in micro USB connector for additional power from standard USB chargers supplied with mobile phones. Thanks to this additional power supply several external disks can be connected to a computer, laptop, tablet or smartphone. The USB 3.2 Gen 1 standard enables transfer speeds of up to 5Gb/s. Thanks to the Charging hub function, mobile devices can be charged even without a connection to a computer. An unused charger will turn this USB hub into a charging hub for free. The hub will also charge phones and tablets with a current up to 1.5A/5V. So hub can easily charge an Android smartphone, Apple iPhone, Apple iPad etc. The USB hub is the ideal accessory for ultrabooks with a small number of USB-A ports. The hub does not even frighten to connect with phones using the appropriate OTG or USB-A > USB-C adapter. You can connect a flash drive, keyboard and mouse to your phone or tablet. Input: • 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-A male connector. • Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. • Connecting USB type A male connector on a fixed 20 cm long cable. Output: • 4x SuperSpeed USB port, USB-A female connectors. • 4x Off/On button with LED indication. • Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). • The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). Features: • Possibility to connect your device while running thanks to the Hot Plug support. • Full Plug and Play support. • Sleep mode support. • The high quality shielded cable ensures high communication speed and minimal undesirable interference. • Dimensions 102 x 31 x 10 mm. • Weight 39 g (incl. cable). • USB cable length 20 cm. The hub power mode via USB cable (bus power): • The USB bus power is sufficient to connect the USB device with a low power consumption (mouse, keyboard, card reader, flash disk, etc.) or own power supply (printer, scanner, 3.5" external disk) to all four ports. • In this power mode, the USB hub is also able to work with up to two magnetic 2.5" external disks simultaneously. • Charging mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2A at 5V (depending on the capabilities of the computer's USB port). The hub power mode via USB + external USB charger (self power): • Integrated micro USB connector for additional powering the hub. • Any mobile device wall charger (not included) with micro USB connector can be used (recommended output current of the charger min. 2A). • In this power mode, the USB hub is able to work with three magnetic 2.5" external disks. Recommended for connection to smartphones and tablets. • Charging mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2.6A at 5V (depending on the capabilities of the external wall charger). Independent charging hub mode without connection to the PC (charging hub): • After power off the connected PC or without connection to the PC the hub works with power supply via USB wall charger as a separate charging USB hub. Just plug a standard wall charger with a micro USB connector into the hub (micro USB input). • Charging mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2.8A at 5V (depending on the capabilities of the external wall charger).

Kods: HUE-MSA

USB Hubi

CANYON hub DS-3 3in1 USB-C Dark Grey

Kods: CNS-TDS3