Ventilatori

Infinity Mirror ARGB Fan​Introducing a new look to PC fans and a new level of installation simplicity and light effect customizability.INFINITY MIRROR FANA combination of the original UNI FAN SL and AL with a touch of infinity mirror, the SL-Infinity fans glow clear with multi-layer effects from any visible angle.CENTERED INFINITY MIRROR ARGBThe circular-shaped infinity mirror at the center of the fan is tuned to have multiple layers spaced 0.5mm apart.SIDE FRAME ARGBFollowing the iconic angular lighting style of SL fans, the SL-Infinity fans have 2 thin LED strips on both sides of the fan blade.ALUMINUM TRIM SURROUNDED INFINITY MIRRORSurrounding aluminum trims are located on both sides of the frame. The geometric shape of the infinity mirror follows the front ARGB lighting strip in a top and bottom pattern that creates a 3D indented look.REAR RIM OF LED AROUND THE ALUMINUM LOGOThe circular-shaped infinity mirror at the center of the fan is tuned to have multiple layers spaced 0.5mm apart.UNPRECEDENTED MODULARITYThe 2nd generation of UNI FAN SL revisits the interlocking style that can connect up to 4 fans in a cluster and makes cable management simpler and improves compatibility with radiators fittings.DAISY CHAIN FANA pin-to-pad contact point passes the signal and power through the fan cluster.REMOVABLE KEYLOCKThe interlocking key on each fan is now removable to improve compatibility with radiators fittings.REVERSIBLE CABLE MODULEThe cable module is now placed at the center of the fan and can switch orientation to reduce clearance issues with the radiator inlet and outlet.UNCOMPROMISED PERFORMANCEThe UNI FAN SL-INF Reverse blade operates with a slightly higher noise level with a better airflow (63.6 CFM Max) comparing to the original UNI FAN SL-INF.LOWER WIND NOISEWhen installed as intake fan with the reverse blade, the wind noise is lower than the regular blade.THE SAME CONTROLLER AS SL-INF16 FANS IN ONE GO FOR EACH GROUP OF FANSThe included controller is in the SLIN120 Triple Pack,supporting up to 16 fans (4 fans in each group) and 2 SM-type connecting devices.L-CONNECT 3 SOFTWARE TO CONTROL SL-INF FANSControl and preview with precision the lighting effect of the SL-Infinity fans with the new L-Connect interface.ENDLESS LIGHTING EFFECTSSimilar to the AL fans, L-Connect 3 can set the lighting effects of the SL-Infinity fans for both the fan blades and the fan frame inner edges separately, or go with pre-set combined lighting effects.INTELLIGENT START/ STOP FANUnique to the SL-Infinity fans, L-Connect 3 features a Start/ Stop mode to completely stop the fan when the CPU or GPU is running below your set temperature (the maximum 50°C), achieving minimal acoustic levels when the system is at low temperature.SYNC FAN SPEED TO MOTHERBOARDL-Connect 3 now offers an option to sync fan speed to the motherboard, also known as the PWM mode in the earlier L-Connect version.QUICK SYNC LIGHTING WITH UNI FAN SL/ AL AND STRIMER PLUS V1/V2The quick sync function saves time to synchronize all LIAN LI device lighting effects with one click. Moreover, synchronize all devices to the motherboard software with one click.Infinity mirror look all aroundReversed Blade fan that intakes air while seeing the infinity effectOnly one cable is required for a cluster of fansEmbedded magnetic Fluid Dynamic Bearing to provide stability, durability, and longevity40 LEDs in each fanQuick PIN connection to provide ease of installationOptimized for mounting at the bottom of the case or on top of the radiator

Kods: G99.12RSLIN1B.00

Ventilatori

INFINITY MIRROR FANA combination of the original UNI FAN SL and AL with a touch of infinity mirror, the SL-Infinity fans glow clear with multi-layer effects from any visible angle.CENTERED INFINITY MIRROR ARGBThe circular-shaped infinity mirror at the center of the fan is tuned to have multiple layers spaced 0.5mm apart.SIDE FRAME ARGBFollowing the iconic angular lighting style of SL fans, the SL-Infinity fans have 2 thin LED strips on both sides of the fan blade.ALUMINUM TRIM SURROUNDED INFINITY MIRRORSurrounding aluminum trims are located on both sides of the frame. The geometric shape of the infinity mirror follows the front ARGB lighting strip in a top and bottom pattern that creates a 3D indented look.REAR RIM OF LED AROUND THE ALUMINUM LOGOInspired by AL fans, there is a bright ARGB rim of light around the LIAN LI logo at the rear.Acoustic noise 29 dB(A) Max120 mmInfinity Mirror effect

Kods: G99.12SLIN1B.00

Ventilatori

Infinity Mirror ARGB Fan​Introducing a new look to PC fans and a new level of installation simplicity and light effect customizability.INFINITY MIRROR FANA combination of the original UNI FAN SL and AL with a touch of infinity mirror, the SL-Infinity fans glow clear with multi-layer effects from any visible angle.CENTERED INFINITY MIRROR ARGBThe circular-shaped infinity mirror at the center of the fan is tuned to have multiple layers spaced 0.5mm apart.SIDE FRAME ARGBFollowing the iconic angular lighting style of SL fans, the SL-Infinity fans have 2 thin LED strips on both sides of the fan blade.ALUMINUM TRIM SURROUNDED INFINITY MIRRORSurrounding aluminum trims are located on both sides of the frame. The geometric shape of the infinity mirror follows the front ARGB lighting strip in a top and bottom pattern that creates a 3D indented look.REAR RIM OF LED AROUND THE ALUMINUM LOGOThe circular-shaped infinity mirror at the center of the fan is tuned to have multiple layers spaced 0.5mm apart.UNPRECEDENTED MODULARITYThe 2nd generation of UNI FAN SL revisits the interlocking style that can connect up to 4 fans in a cluster and makes cable management simpler and improves compatibility with radiators fittings.DAISY CHAIN FANA pin-to-pad contact point passes the signal and power through the fan cluster.REMOVABLE KEYLOCKThe interlocking key on each fan is now removable to improve compatibility with radiators fittings.REVERSIBLE CABLE MODULEThe cable module is now placed at the center of the fan and can switch orientation to reduce clearance issues with the radiator inlet and outlet.UNCOMPROMISED PERFORMANCEThe UNI FAN SL-INF Reverse blade operates with a slightly higher noise level with a better airflow (63.6 CFM Max) comparing to the original UNI FAN SL-INF.LOWER WIND NOISEWhen installed as intake fan with the reverse blade, the wind noise is lower than the regular blade.THE SAME CONTROLLER AS SL-INF16 FANS IN ONE GO FOR EACH GROUP OF FANSThe included controller is in the SLIN120 Triple Pack,supporting up to 16 fans (4 fans in each group) and 2 SM-type connecting devices.L-CONNECT 3 SOFTWARE TO CONTROL SL-INF FANSControl and preview with precision the lighting effect of the SL-Infinity fans with the new L-Connect interface.ENDLESS LIGHTING EFFECTSSimilar to the AL fans, L-Connect 3 can set the lighting effects of the SL-Infinity fans for both the fan blades and the fan frame inner edges separately, or go with pre-set combined lighting effects.INTELLIGENT START/ STOP FANUnique to the SL-Infinity fans, L-Connect 3 features a Start/ Stop mode to completely stop the fan when the CPU or GPU is running below your set temperature (the maximum 50°C), achieving minimal acoustic levels when the system is at low temperature.SYNC FAN SPEED TO MOTHERBOARDL-Connect 3 now offers an option to sync fan speed to the motherboard, also known as the PWM mode in the earlier L-Connect version.QUICK SYNC LIGHTING WITH UNI FAN SL/ AL AND STRIMER PLUS V1/V2The quick sync function saves time to synchronize all LIAN LI device lighting effects with one click. Moreover, synchronize all devices to the motherboard software with one click.Infinity mirror look all aroundReversed Blade fan that intakes air while seeing the infinity effectOnly one cable is required for a cluster of fansEmbedded magnetic Fluid Dynamic Bearing to provide stability, durability, and longevity40 LEDs in each fanQuick PIN connection to provide ease of installationOptimized for mounting at the bottom of the case or on top of the radiator

Kods: G99.12RSLIN1W.00

Ventilatori

INFINITY MIRROR FANA combination of the original UNI FAN SL and AL with a touch of infinity mirror, the SL-Infinity fans glow clear with multi-layer effects from any visible angle.CENTERED INFINITY MIRROR ARGBThe circular-shaped infinity mirror at the center of the fan is tuned to have multiple layers spaced 0.5mm apart.SIDE FRAME ARGBFollowing the iconic angular lighting style of SL fans, the SL-Infinity fans have 2 thin LED strips on both sides of the fan blade.ALUMINUM TRIM SURROUNDED INFINITY MIRRORSurrounding aluminum trims are located on both sides of the frame. The geometric shape of the infinity mirror follows the front ARGB lighting strip in a top and bottom pattern that creates a 3D indented look.REAR RIM OF LED AROUND THE ALUMINUM LOGOInspired by AL fans, there is a bright ARGB rim of light around the LIAN LI logo at the rear.Acoustic noise 29 dB(A) Max120 mmInfinity Mirror effect

Kods: G99.12SLIN1W.00

Dzesētāji (Coolers)

Kods: XC229

Dzesētāji (Coolers)

The new M704 is the first CPU cooler to widening the Performance A+ series. Just like the power supplies, this CPU cooler is completely black, with a red fan. The M704 has four equally black, extremely efficient heat pipes, which allow for a cooling capacity of up to 200W.The red 120mm PWM fan completes the CPU cooler, which is especially appropriate for gaming systems with potent multicore processors. Thanks to the multi-socket design, the cooler can be applied on all current AMD and Intel sockets.Included in the scope of delivery is – besides heatsink and 120mm PWM fan – mounting material for sockets LGA1700/1954/1151/1150/1155/1851/1156/1200 and AM4 / AM5 illustrated assembly instructions as well as a tube of thermal paste.silent, hydro bearing 120mm PWM-fanblack heat-sinkfour black 6mm copper heat pipes for better heat flowfin Design for high airflow and efficient cooling of the CPU and surrounding componentsslight overhang of the fan avoids hotspotspossible mounting of the fan on both sides of the heat sinksuitable for all current AMD and INTEL sockets

Kods: XC051

Korpusi

Chassis INTER-TECH IT-6505 Reto, 1x USB 3.0, 1x USB 2.0, PSU optional

Kods: IT-6505

Korpusi

Chassis INTER-TECH IT-2812 Business, 2x USB 3.0, 2x USB 2.0, PSU optional

Kods: IT-2812_BUSINESS

Korpusi

FSP Case , S120 , Black , Mid Tower , Power supply included No

Kods: S120-B

Korpusi

with USB 3.0 , * Front mesh design provides superior ventilation to maintain constant cooling * Front I/O panel provides easy access for users * Side panel security lock hole for higher security * Side ventilation holes for better cooling performance * Front 120 mm fan provides the best cooling solution

Kods: DP-MATX-SMTR

Stiprinājumi un aksesuāri

NEBULA Capsule Gimbal Stand NEBULA Capsule Gimbal Stand, 0-360 Degree Vertical and Horizontal Adjustable Viewing Angle, 3s Easy Setup, for The Capsule Series Lightweight and Durable: Weighs only 300g and is made from aluminum alloy for greater stability and durability. Flexible Viewing Angles: Supports 360° vertical and horizontal rotation to unlock more viewing angles. Wide Compatibility: Universal 1/4 inch screw mount with a maximum load capacity of 1 kg.

Kods: D0719111

Stiprinājumi un aksesuāri

The Neomounts DS45-430BL19 is a TV desk stand for screens up to 75" with a weight capacity of 40 kg. The TV stand can be adjusted in height for the optimum viewing position. For maximum compatibility the DS45-430BL19 is suitable for screens that meet pattern 200x200 to 800x400 mm. Additionally, the DS45-430BL19 is also available for non-standard VESA patterns. The DS45-430BL19 TV stand provides an excellent solution for users who prefer not to drill holes in walls or for those who no longer have the original TV stand.

Kods: DS45-430BL19