Korpusi

Core performance and aestheticsLight Base 500 stands for a clean design and the core values of gaming: performance, accessibility and functionality. Whether you are a gamer, content creator, or hardware enthusiast: Light Base 500 provides a professional-grade foundationAngled slide-out fan frame on the side routes air direct ly to the GPUFans can be installed in the lowered fan bay to line up perfectly with the case floor3 Pure Wings 3 120mm PWM intake fans with reversed fan blades in the side1 Pure Wings 3 120mm PWM fan as a rear exhaustSpacious design for radiators up to 360mm, an ATX motherboard, 2 HDDs and 2 SSDs at the same time2 possible PSU positions enable backside connector motherboardsFilters i n the side and the bottom to prevent the system from collecting dustZero RGB for an unobtrusive and elegant appearance in any room

Kods: BGW83

Korpusi

NZXT PC case H5 Flow RGB 2024 midi tower white

Kods: CC-H52FW-R1

Korpusi

The Vessel to Connect Your DesireDesigned to fulfill your performance aspirations, the HS01 is engineered for optimal cooling and a performance-driven aesthetic. With advanced flexibility and broad compatibility, it supports everything you need for your ideal build.Craft Your Build, Showcase Your StyleThe reversible design allows the entire setup to be positioned with the side glass panel on either the left or right, ensuring your build is always on display.One-Piece, Optimal SupportThe integrated front bezel, paired with the adjustable front fan bracket, creates a cohesive structure that offers both robust support and flexible airflow performance. Chimney-Style CoolingThe natural chimney effect drives efficient airflow from bottom intake to top exhaust.Dual rear fans further enhance heat dissipation, ensuring consistent and reliable cooling performance.Next-Level Airflow EfficiencyHS01 offers 10% better cooling than traditional layouts, with efficiency comparable to open-frame designs.Flexible Cooling CompatibilityWith an exterior installation design and re-organized rear fan position, the HS01 maximizes interior space, supporting more fans and AIO size options for enhanced cooling flexibility.Top-Down StrengthSturdy corner pillars ensure balanced weight distribution and structural integrity.ARGB and I/O Built to StandardCustomize vibrant ARGB lighting with 29 stylish modes. Features USB Type-C, two Type-A ports, audio and mic port for seamless connectivity.Optimized Fans SupportRepositioned rear fans and radiator support outward, freeing up interior space for more cooling potential without compromising the capacity.Back-Connect Motherboard ReadySupports both standard and back-connect motherboards.Fully compatible with MSI Project Zero, ASUS BTF motherboards and more.The PRO ExperienceHS01 PRO comes with 5 pre-installed GF120 V2 ARGB fans, fully supporting motherboard ARGB synchronization for seamless lighting control.Craft Your Build, Showcase Your StyleOne-Piece, Optimal SupportChimney-Style CoolingNext-Level Airflow EfficiencyFlexible Cooling CompatibilityTop-Down StrengthARGB and I/O Built to StandardOptimized Fans SupportBack-Connect Motherboard ReadyThe PRO Experience

Kods: HS01 PRO (W)

Korpusi

Corsair PC Case , 3500X ARGB , Black , Mid-Tower , Power supply included No , ATX

Kods: CC-9011278-WW

Korpusi

Timeless Elegance, Endless PerformanceThe LANCOOL 217 is a mid-tower case that combines innovative cooling design with real wood accents. It comes pre-installed with five fans, delivering optimized airflow right out of the box. A flexible PSU mounting design makes cable management easier. Available in Black with dark wood accents or White with light wood, it blends natural beauty with high-performance capability.AVAILABLE IN TWO COLORSThe LANCOOL 217 is available in both black and white, offering a perfect match for any build style.WHERE WOOD MEETS AIRFLOWThe LANCOOL 217 is thoughtfully engineered to blend natural wooden aesthetics with high-performance airflow. It features a front panel that pairs finely perforated mesh with a wooden frame to maintain an organic look while allowing for unrestricted airflow.The black version is accented with rich walnut wood, delivering a bold and contemporary feel. The white version incorporates light birch wood, offering a sleek, minimalist aesthetic ideal for modern tech setups.READY-TO-GO COOLING WITH5 PRE-INSTALLED FANSThe LANCOOL 217 chassis comes equipped with high-performance fans at the front, rear, and bottom, providing powerful airflow to keep internal components running smoothly and reliably.The front fans utilize FDB bearing for quieter operation and extended lifespan. Designed for performance, they deliver powerful airflow and can be repositioned to better target the CPU or GPU.Above the PSU shroud, the bottom fans are specifically positioned to direct cool air toward the GPU, helping to effectively manage its temperature.At the rear, a 140mm fan effectively removes warm air, helping to maintain balanced airflow throughout the system.Independent testing at the PPLP Lab confirmed that the LANCOOL 217 delivers top-tier thermal performance, placing it among the highest-ranked cases in its class. Its efficient airflow design and strong out-of-the-box cooling earned it the prestigious S-Tier Case Performance Award, highlighting its exceptional capabilities in thermal management.FLEXIBLE INSTALLATION, TOOL-LESS DESIGNThe LANCOOL 217 uses a tool-less fan mounting system with rubber pads on the front and bottom fans, allowing users to easily shift between CPU-focused and GPU-focused cooling modes.The PCIe slot bracket can be turned 90 degrees to support vertical GPU mounting. In this setup, the bottom fan can be moved under the PSU shroud for a hidden look, giving users more flexibility when building their system.FLEXIBLE AND EASY INSTALLATIONThe LANCOOL 217 comes with screws and washers for installing 120mm fans. Users can take out the screws on the two bottom fans to swap them for different ones. The PSU shroud cover can also be removed, making room for up to three 120mm fans.DUAL PSU MOUNTING, FLEXIBLE BUILDSThe LANCOOL 217 supports two PSU mounting ways, giving the users more options based on the PSU size, cable routing, and overall build layout. This flexible design makes it easier to set up the system, enhancing convenience and compatibility.(Standard Mode)When the PSU connectors face the front, it supports ATX PSU up to 220mm long, which is suitable for most standard installs.(Rotated Mode)When the PSU is turned 90° with the connectors facing the right side, it supports compact PSU up to 180mm. This optimizes cable routing space and allows the fan to directly cool the PSU for improved cooling efficiency. Users can also move the two included bottom fans under the bracket for a hidden look, making the build cleaner and more organized.MOTHERBOARD COMPATIBILITYSupports motherboard sizes:EEB (width ATX/ Micro-ATX/ Mini-ITX.Back-connect motherboard support: ATX, Micro-ATX.Compared to the LANCOOL 216, the LANCOOL 217 now supports back-connect motherboards. By removing the HDD cage behind the motherboard tray, it can accommodate M-ATX back-connect motherboards.DRIVE SUPPORTBehind motherboard tray: 2 x 2.5″ SSDs or 1 x 2.5″ SSD(when using a rear-mounted Micro-ATX motherboard) HDD cage: 2 x 3.5″ HDD + 2 x 2.5″ SSD+(2 x 3.5″ HDD or 2 x 2.5″ SSD) PSU shroud cover: 1 x 2.5″ SSDLARGE GPU, EXCEPTIONAL COMPATIBILITYThe LANCOOL 217 supports GPU up to 380mm in length and features an adjustable anti-sag bracket, ensuring a perfect and secure fit for GPU.COMPREHENSIVE FAN/RADIATOR SUPPORTThe LANCOOL 217 offers extensive compatibility, supporting both 120mm and 140mm fans.BRACKET FOR FAST AND EASY INSTALLATIONThe top radiator bracket can be fully removed from the chassis, allowing users to install hardware more conveniently. When removing the bracket, the left-side frame bar is removed along with it, creating more available space for installation.USER-FRIENDLY DESIGNThe LANCOOL 217 features two power buttons suitable for different usage. The top power button is easy to reach when the case is on the floor, and the front button works best if the case is on the desk.Both the front and bottom include removable magnetic dust filters, effectively preventing dust buildup and extending hardware lifespan.All fans come with rubber anti-vibration mounts combined with low-noise optimized design, keeping operation noise levels as low as 33.2 dBA for a quiet and comfortable environment.Mid-tower chassis designed for advanced workstations and high-performance setupsCompatible with back-connect motherboards for ultra-clean cable routingSupports up to E-ATX / EEB motherboards and dual PSU mounting orientationsComes pre-installed with 5 high-performance fans for optimal out-of-box airflowTool-less front fan mounting system for effortless installation and maintenanceCertified with PPLP for enhanced professional use compliance

Kods: G99.LAN217W.00

Korpusi

IN COLLABORATION WITH PCMRThe O11 VISION COMPACT is a collaboration with PC Master Race (PCMR), which is a smaller iteration of the original O11 VISION.With a customizable mesh top panel and support for back-connect ATX motherboards, this case is designed for ultimate flexibility.The main tenet of PCMR is freedom and customization, and the O11 VISION COMPACT enables it, by allowing the user to build the ultimate battlestation, tailored to their individual preferences.Enjoy enhanced stability with the removable GPU bracket and experience concealing cable management for the cleanest look. The unobstructed view for the optimal showcasing of the components without clutter sets a new benchmark in DIY aesthetics.The O11 VISION COMPACT embodies the spirit of LIAN LI and PCMR, providing PC enthusiasts the opportunity to create their finest masterpiece.SIZE COMPARISONThe size of the O11 VISION COMPACT is based on the original from the O11 Dynamic. Its volume has been reduced from 67.8 L (O11 Vision) to 57.4 L, (O11 Vision Compact) making it 10.4 L more compact.UNOBSTRUCTED HARDWARE SHOWCASEO11 VISION COMPACT enhances your setup with its unique swappable top panels and concealed AIO tubing design, giving your chassis a standout and elegant look.TWO COLORSThis chassis comes in two colors: black and white. Black version features a tinted glass panel, while the white version comes with clear tempered glass panels along with matching grommets, thumb screws, and brackets.Brushed aluminiun finishInner Corner SilkscreenSwappable Mesh/Glass Panels3mm Top Tempered Glass4mm Tinted Side and Front Tempered GlassAluminum with White Powder CoatingOuter Corner White SilkscreenSwappable Mesh/Glass Panels3mm Top Tempered Glass4mm Clear Side and Front Tempered GlassEXTREME VERSATILITY – VISION OR MESHO11 VISION COMPACT offers two different top panel options: a mesh panel designed for top AIO installation, and a tempered glass panel that allows for 270-degree side visibility, showcasing your components beautifully.STURDY SUPPORT STRUCTUREThe glass panels meet at the top left corner at a mounting key that provides alignment and magnetic support to the glass panels. The mounting key is hidden behind a triangular silk screen, with the white version being an elegant gradient white and grey. The mounting key used is rated for 35 kg of force to ensure a strong support.THREE-SIDED GLASS MODE: SHOWCASE YOUR STYLEThe space above the motherboard can be used to install monitor accessories. There’s also an opening at the back to allow the monitor’s cable to be easily routed to the motherboard’s back IO. Additionally, the AIO tubing can be concealed in the second chamber, while the support for back-connect motherboards ensures a clean and beautiful layout in the main chamber.The chasis supports up to a maximum of 14 fans (mesh mode push-pull set up) and up to 360mm radiator, ensuring excellent ventilation and cooling while maintaining a tidy appearance even with loads of component.Concealed Cables: Simple and ElegantBeside the rear pass-through grommet, an ATX EPS cover provides a clean BTF look. Long vertical grommets run the right side of the motherboard. The large top grommet can pass a CPU pump block, and can be removed/re-inserted for maximum clearance. Detaching the cable cover, AIO tubes slide into provided channels for a cleaner look.POWERFUL COOLING COMPATIBILITYMESH MODESupports up to 11x120mm fans, or 2x140mm and 8x120mm fansVISION MODESupports up to 8x120mm fansIMPROVE INTAKE WITH REVERSIBLE BRACKETThe side radiator bracket can be removed for easy radiator and fan installation. Remove the thumbscrew on the right-side interior, and the bracket can be removed. The bracket can also be reversely installed for different setup configurations.PRE-INSTALLED GPU ANTI-SAG BRACKETThe O11 Vision Compact features a built-in removable GPU anti-sag bracket that holds GPU ranging from 278mm to 408mm.The height is adjustable by turning the thumbscrew behind the motherboard tray to secure it.EASY ACCESS FOR DUST FILTERSThe bottom of the O11 VISION COMPACT is equipped with a full-length dust filter that pull out from the left side. There are four magnets that attach the filter tight against the frame.Front I/OThe power button features a white backlight to indicate the power status. The front I/O ports are located at the foot design, offering a variety of connections for convenience.HIGH STORAGE CAPACITYThe removable cable management bar is secured by magnetic latches. Supports up to 2×2.5″ SSDs and can also accommodate a fan or ARGB hub.DRIVE CAGE2 x 2.5″ SSD or 2 x 3.5″ HDD. Each drive cage is independently removable, freeing up space for cable management.EASY CABLE MANAGEMENTLike the O11 VISION, the O11 VISION COMPACT also comes with 2 dual-layer cable clips that slide out of their SSD-style mounting points. The clip can hold the bulk of PSU cables, while the Velcro strap on top is ideal for fan cable management. 6 additional Velcro straps, 2 above and 4 below, tidy up cables to the motherboard and storage.EXTENDED ROOMThe PSU mounting bracket, carrying over the design from the O11 VISION, protrudes 15mm from the rear of the case, allowing extra space for cable management. Additionally, a cable tie point along the rear of the case helps keep the rear I/O cables tidy.Two top panel options: mesh or tempered glassVision mode with tempered glass for an uninterrupted view of componentsMesh mode with fan bracket for additional radiator or fan supportSupports up to 11 fans and a maximum of 360mm large radiatorCompatible with back-connect ATX motherboardsHidden AIO tube design for a streamlined appearanceDual-chamber layout with cable management compartment and cable holders

Kods: G99.O11VPW.00

Korpusi

IN COLLABORATION WITH PCMRThe O11 VISION COMPACT is a collaboration with PC Master Race (PCMR), which is a smaller iteration of the original O11 VISION.With a customizable mesh top panel and support for back-connect ATX motherboards, this case is designed for ultimate flexibility.The main tenet of PCMR is freedom and customization, and the O11 VISION COMPACT enables it, by allowing the user to build the ultimate battlestation, tailored to their individual preferences.Enjoy enhanced stability with the removable GPU bracket and experience concealing cable management for the cleanest look. The unobstructed view for the optimal showcasing of the components without clutter sets a new benchmark in DIY aesthetics.The O11 VISION COMPACT embodies the spirit of LIAN LI and PCMR, providing PC enthusiasts the opportunity to create their finest masterpiece.SIZE COMPARISONThe size of the O11 VISION COMPACT is based on the original from the O11 Dynamic. Its volume has been reduced from 67.8 L (O11 Vision) to 57.4 L, (O11 Vision Compact) making it 10.4 L more compact.UNOBSTRUCTED HARDWARE SHOWCASEO11 VISION COMPACT enhances your setup with its unique swappable top panels and concealed AIO tubing design, giving your chassis a standout and elegant look.TWO COLORSThis chassis comes in two colors: black and white. Black version features a tinted glass panel, while the white version comes with clear tempered glass panels along with matching grommets, thumb screws, and brackets.Brushed aluminiun finishInner Corner SilkscreenSwappable Mesh/Glass Panels3mm Top Tempered Glass4mm Tinted Side and Front Tempered GlassAluminum with White Powder CoatingOuter Corner White SilkscreenSwappable Mesh/Glass Panels3mm Top Tempered Glass4mm Clear Side and Front Tempered GlassEXTREME VERSATILITY – VISION OR MESHO11 VISION COMPACT offers two different top panel options: a mesh panel designed for top AIO installation, and a tempered glass panel that allows for 270-degree side visibility, showcasing your components beautifully.STURDY SUPPORT STRUCTUREThe glass panels meet at the top left corner at a mounting key that provides alignment and magnetic support to the glass panels. The mounting key is hidden behind a triangular silk screen, with the white version being an elegant gradient white and grey. The mounting key used is rated for 35 kg of force to ensure a strong support.THREE-SIDED GLASS MODE: SHOWCASE YOUR STYLEThe space above the motherboard can be used to install monitor accessories. There’s also an opening at the back to allow the monitor’s cable to be easily routed to the motherboard’s back IO. Additionally, the AIO tubing can be concealed in the second chamber, while the support for back-connect motherboards ensures a clean and beautiful layout in the main chamber.The chasis supports up to a maximum of 14 fans (mesh mode push-pull set up) and up to 360mm radiator, ensuring excellent ventilation and cooling while maintaining a tidy appearance even with loads of component.Concealed Cables: Simple and ElegantBeside the rear pass-through grommet, an ATX EPS cover provides a clean BTF look. Long vertical grommets run the right side of the motherboard. The large top grommet can pass a CPU pump block, and can be removed/re-inserted for maximum clearance. Detaching the cable cover, AIO tubes slide into provided channels for a cleaner look.POWERFUL COOLING COMPATIBILITYMESH MODESupports up to 11x120mm fans, or 2x140mm and 8x120mm fansVISION MODESupports up to 8x120mm fansIMPROVE INTAKE WITH REVERSIBLE BRACKETThe side radiator bracket can be removed for easy radiator and fan installation. Remove the thumbscrew on the right-side interior, and the bracket can be removed. The bracket can also be reversely installed for different setup configurations.PRE-INSTALLED GPU ANTI-SAG BRACKETThe O11 Vision Compact features a built-in removable GPU anti-sag bracket that holds GPU ranging from 278mm to 408mm.The height is adjustable by turning the thumbscrew behind the motherboard tray to secure it.EASY ACCESS FOR DUST FILTERSThe bottom of the O11 VISION COMPACT is equipped with a full-length dust filter that pull out from the left side. There are four magnets that attach the filter tight against the frame.Front I/OThe power button features a white backlight to indicate the power status. The front I/O ports are located at the foot design, offering a variety of connections for convenience.HIGH STORAGE CAPACITYThe removable cable management bar is secured by magnetic latches. Supports up to 2×2.5″ SSDs and can also accommodate a fan or ARGB hub.DRIVE CAGE2 x 2.5″ SSD or 2 x 3.5″ HDD. Each drive cage is independently removable, freeing up space for cable management.EASY CABLE MANAGEMENTLike the O11 VISION, the O11 VISION COMPACT also comes with 2 dual-layer cable clips that slide out of their SSD-style mounting points. The clip can hold the bulk of PSU cables, while the Velcro strap on top is ideal for fan cable management. 6 additional Velcro straps, 2 above and 4 below, tidy up cables to the motherboard and storage.EXTENDED ROOMThe PSU mounting bracket, carrying over the design from the O11 VISION, protrudes 15mm from the rear of the case, allowing extra space for cable management. Additionally, a cable tie point along the rear of the case helps keep the rear I/O cables tidy./IN COLLABORATION WITH PCMRThe O11 VISION COMPACT is a collaboration with PC Master Race (PCMR), which is a smaller iteration of the original O11 VISION.With a customizable mesh top panel and support for back-connect ATX motherboards, this case is designed for ultimate flexibility.The main tenet of PCMR is freedom and customization, and the O11 VISION COMPACT enables it, by allowing the user to build the ultimate battlestation, tailored to their individual preferences.Enjoy enhanced stability with the removable GPU bracket and experience concealing cable management for the cleanest look. The unobstructed view for the optimal showcasing of the components without clutter sets a new benchmark in DIY aesthetics.The O11 VISION COMPACT embodies the spirit of LIAN LI and PCMR, providing PC enthusiasts the opportunity to create their finest masterpiece.SIZE COMPARISONThe size of the O11 VISION COMPACT is based on the original from the O11 Dynamic. Its volume has been reduced from 67.8 L (O11 Vision) to 57.4 L, (O11 Vision Compact) making it 10.4 L more compact.UNOBSTRUCTED HARDWARE SHOWCASEO11 VISION COMPACT enhances your setup with its unique swappable top panels and concealed AIO tubing design, giving your chassis a standout and elegant look.TWO COLORSThis chassis comes in two colors: black and white. Black version features a tinted glass panel, while the white version comes with clear tempered glass panels along with matching grommets, thumb screws, and brackets.Brushed aluminiun finishInner Corner SilkscreenSwappable Mesh/Glass Panels3mm Top Tempered Glass4mm Tinted Side and Front Tempered GlassAluminum with White Powder CoatingOuter Corner White SilkscreenSwappable Mesh/Glass Panels3mm Top Tempered Glass4mm Clear Side and Front Tempered GlassEXTREME VERSATILITY – VISION OR MESHO11 VISION COMPACT offers two different top panel options: a mesh panel designed for top AIO installation, and a tempered glass panel that allows for 270-degree side visibility, showcasing your components beautifully.STURDY SUPPORT STRUCTUREThe glass panels meet at the top left corner at a mounting key that provides alignment and magnetic support to the glass panels. The mounting key is hidden behind a triangular silk screen, with the white version being an elegant gradient white and grey. The mounting key used is rated for 35 kg of force to ensure a strong support.THREE-SIDED GLASS MODE: SHOWCASE YOUR STYLEThe space above the motherboard can be used to install monitor accessories. There’s also an opening at the back to allow the monitor’s cable to be easily routed to the motherboard’s back IO. Additionally, the AIO tubing can be concealed in the second chamber, while the support for back-connect motherboards ensures a clean and beautiful layout in the main chamber.The chasis supports up to a maximum of 14 fans (mesh mode push-pull set up) and up to 360mm radiator, ensuring excellent ventilation and cooling while maintaining a tidy appearance even with loads of component.Concealed Cables: Simple and ElegantBeside the rear pass-through grommet, an ATX EPS cover provides a clean BTF look. Long vertical grommets run the right side of the motherboard. The large top grommet can pass a CPU pump block, and can be removed/re-inserted for maximum clearance. Detaching the cable cover, AIO tubes slide into provided channels for a cleaner look.POWERFUL COOLING COMPATIBILITYMESH MODESupports up to 11x120mm fans, or 2x140mm and 8x120mm fansVISION MODESupports up to 8x120mm fansIMPROVE INTAKE WITH REVERSIBLE BRACKETThe side radiator bracket can be removed for easy radiator and fan installation. Remove the thumbscrew on the right-side interior, and the bracket can be removed. The bracket can also be reversely installed for different setup configurations.PRE-INSTALLED GPU ANTI-SAG BRACKETThe O11 Vision Compact features a built-in removable GPU anti-sag bracket that holds GPU ranging from 278mm to 408mm.The height is adjustable by turning the thu

Kods: G99.O11VPX.00

Korpusi

The H7 Flow revolutionizes GPU cooling in a classic mid-tower form factor. Its vertical PSU layout allows space for 3 x 120mm bottom fans, offering efficient cooling without expanding the case footprint.Dedicated GPU CoolingSupports three bottom-mounted 120mm fans for direct GPU cooling in a narrow mid-tower footprint.Angled H7 Flow showing front 3 120mm fansAngled H7 Flow showing front 3 120mm fansOut-of-the-Box PerformanceComes equipped with 3 x 120mm front-mounted fans for exceptional out-of-the-box cooling performance.Optimized for AirflowHigh-performance mesh panels maximize airflow for both intake and exhaust, as well as filter dust.H7 Flow showing radiator size supportH7 Flow showing radiator size supportLarge Radiator SupportSupports up to a 420mm radiator in front and 360mm radiator up top for max cooling potential.Open Back of H7 Flow showing cable managementOpen Back of H7 Flow showing cable managementEasily Manage CablesIntuitive cable management system with wide channels, built-in hooks, and included straps for easy routing.10-Fan CapacityCapacity for up to 10 fans in total: 3 up top, 3 in front, 3 on bottom, and 1 in the rear.Top I/O PortsConveniently access 2 x USB-A and 1 x USB-C ports located on the top panel.Exploded view of H7 Flow panelsExploded view of H7 Flow panelsTool-less Panel AccessTool-less access to the front, top, and side panels makes building and upgrading a breeze.Supports three bottom-mounted 120mm fans for direct GPU cooling while retaining a narrow mid-tower footprintComes equipped with three front-mounted 120mm fans for exceptional out-of-the-box coolingHigh-performance mesh panels maximize airflow for both intake and exhaust, as well as filter dustSupports up to 420mm radiators in the front and 360mm radiators in the top for powerful cooling potentialIntuitive cable management system with wide channels, built-in hooks, and included straps for easy routingCapacity for up to 10 fans in total: 3 up top, 3 in front, 3 on bottom, and 1 in the rearConveniently access 2 x USB-A and 1 x USB-C ports located on the top panelTool-less access to the front, top, and side panels makes building and upgrading a breeze

Kods: CM-H72FW-01

Korpusi

Timeless Elegance, Endless PerformanceThe LANCOOL 217 is a mid-tower case that combines innovative cooling design with real wood accents. It comes pre-installed with five fans, delivering optimized airflow right out of the box. A flexible PSU mounting design makes cable management easier. Available in Black with dark wood accents or White with light wood, it blends natural beauty with high-performance capability.AVAILABLE IN TWO COLORSThe LANCOOL 217 is available in both black and white, offering a perfect match for any build style.WHERE WOOD MEETS AIRFLOWThe LANCOOL 217 is thoughtfully engineered to blend natural wooden aesthetics with high-performance airflow. It features a front panel that pairs finely perforated mesh with a wooden frame to maintain an organic look while allowing for unrestricted airflow.The black version is accented with rich walnut wood, delivering a bold and contemporary feel. The white version incorporates light birch wood, offering a sleek, minimalist aesthetic ideal for modern tech setups.READY-TO-GO COOLING WITH5 PRE-INSTALLED FANSThe LANCOOL 217 chassis comes equipped with high-performance fans at the front, rear, and bottom, providing powerful airflow to keep internal components running smoothly and reliably.The front fans utilize FDB bearing for quieter operation and extended lifespan. Designed for performance, they deliver powerful airflow and can be repositioned to better target the CPU or GPU.Above the PSU shroud, the bottom fans are specifically positioned to direct cool air toward the GPU, helping to effectively manage its temperature.At the rear, a 140mm fan effectively removes warm air, helping to maintain balanced airflow throughout the system.Independent testing at the PPLP Lab confirmed that the LANCOOL 217 delivers top-tier thermal performance, placing it among the highest-ranked cases in its class. Its efficient airflow design and strong out-of-the-box cooling earned it the prestigious S-Tier Case Performance Award, highlighting its exceptional capabilities in thermal management.FLEXIBLE INSTALLATION, TOOL-LESS DESIGNThe LANCOOL 217 uses a tool-less fan mounting system with rubber pads on the front and bottom fans, allowing users to easily shift between CPU-focused and GPU-focused cooling modes.The PCIe slot bracket can be turned 90 degrees to support vertical GPU mounting. In this setup, the bottom fan can be moved under the PSU shroud for a hidden look, giving users more flexibility when building their system.FLEXIBLE AND EASY INSTALLATIONThe LANCOOL 217 comes with screws and washers for installing 120mm fans. Users can take out the screws on the two bottom fans to swap them for different ones. The PSU shroud cover can also be removed, making room for up to three 120mm fans.DUAL PSU MOUNTING, FLEXIBLE BUILDSThe LANCOOL 217 supports two PSU mounting ways, giving the users more options based on the PSU size, cable routing, and overall build layout. This flexible design makes it easier to set up the system, enhancing convenience and compatibility.(Standard Mode)When the PSU connectors face the front, it supports ATX PSU up to 220mm long, which is suitable for most standard installs.(Rotated Mode)When the PSU is turned 90° with the connectors facing the right side, it supports compact PSU up to 180mm. This optimizes cable routing space and allows the fan to directly cool the PSU for improved cooling efficiency. Users can also move the two included bottom fans under the bracket for a hidden look, making the build cleaner and more organized.MOTHERBOARD COMPATIBILITYSupports motherboard sizes:EEB (width ATX/ Micro-ATX/ Mini-ITX.Back-connect motherboard support: ATX, Micro-ATX.Compared to the LANCOOL 216, the LANCOOL 217 now supports back-connect motherboards. By removing the HDD cage behind the motherboard tray, it can accommodate M-ATX back-connect motherboards.DRIVE SUPPORTBehind motherboard tray: 2 x 2.5″ SSDs or 1 x 2.5″ SSD(when using a rear-mounted Micro-ATX motherboard) HDD cage: 2 x 3.5″ HDD + 2 x 2.5″ SSD+(2 x 3.5″ HDD or 2 x 2.5″ SSD) PSU shroud cover: 1 x 2.5″ SSDLARGE GPU, EXCEPTIONAL COMPATIBILITYThe LANCOOL 217 supports GPU up to 380mm in length and features an adjustable anti-sag bracket, ensuring a perfect and secure fit for GPU.COMPREHENSIVE FAN/RADIATOR SUPPORTThe LANCOOL 217 offers extensive compatibility, supporting both 120mm and 140mm fans.BRACKET FOR FAST AND EASY INSTALLATIONThe top radiator bracket can be fully removed from the chassis, allowing users to install hardware more conveniently. When removing the bracket, the left-side frame bar is removed along with it, creating more available space for installation.USER-FRIENDLY DESIGNThe LANCOOL 217 features two power buttons suitable for different usage. The top power button is easy to reach when the case is on the floor, and the front button works best if the case is on the desk.Both the front and bottom include removable magnetic dust filters, effectively preventing dust buildup and extending hardware lifespan.All fans come with rubber anti-vibration mounts combined with low-noise optimized design, keeping operation noise levels as low as 33.2 dBA for a quiet and comfortable environment.Mid-tower chassis designed for advanced workstations and high-performance setupsCompatible with back-connect motherboards for ultra-clean cable routingSupports up to E-ATX / EEB motherboards and dual PSU mounting orientationsComes pre-installed with 5 high-performance fans for optimal out-of-box airflowTool-less front fan mounting system for effortless installation and maintenanceCertified with PPLP for enhanced professional use compliance

Kods: G99.LAN217INFW.00

Korpusi

We know a lot about PC cases, and it\'s hard to surprise us, but our eyes still light up at the sight of the ENDORFY Arx 700 ARGB (and we see this beauty every day). We’ve put the best of our knowledge and experience into it – and it sure is a winner.This is so far the largest PC case (486×228×472 mm) available with the ENDORFY logo. The ENDORFY Arx 700 ARGB will be a perfect fit for your components – such as a tall cooling system (up to 179 mm), 8 fans (including 4 Stratus 140 PWM ARGB which you get for a good start), and virtually any available graphics card (up to 410 mm). It also keeps them in a light draft, like a crisp morning breeze on a mountain meadow – thanks to the mesh panels on the front and top.We will, we will freeze you!We have a message that will freeze you. Literally, because the Arx 700 ARGB is as cold as the heart of a guild buddy who won’t lend you gold for new armor. Simply put – your components keep a low temperature even when you squeeze the last drops of juice out of your PC.All thanks to the Arx 700 ARGB‘s spacious interior with room for 8 freezers fans. What’s more, the front and top panels are also filters, so there’s no need for additional dust covers. Compared to traditional solutions, a single layer of filters improves air circulation and makes it easier to keep the components in a pleasant breeze (because cooling is extremely important to us). Your mom will be proud of this (ours already are).Heart made of stone fansWe sometimes say that the heart of the Arx 700 ARGB is made of stone fans. And not just any fans – we mean the 4 Stratus 140 PWM ARGB fans, we developed in cooperation with Synergy Cooling. We also added a splitter, so you can control their speed with a PWM signal from one motherboard connector.The Stratus 140 PWM ARGB is our colorful pride and joy. Its 14 cm height combined with the optional semi-passive mode is perfect for providing great airflow inside the PC case. Plus, the fan runs on a durable FDB bearing, so you can work (and play) in silence even in extreme conditions. Some even think that our Arx 700 ARGB would do well in a survival camp, but we haven\'t tested it. Yet.No thick filtersGreat products don\'t need (thick) filters – especially when it comes to PC cases. The double dust cover protects against dirt, but at the same time it restricts the airflow like a synthetic costume at a cosplay convention. We get hot just thinking about it!That’s why the Arx 700 ARGB has – drumroll, please – a top and front mesh panel that serve as filters.Thanks to them, our PC case is as airy as a mountain meadow in spring, and you don’t have to install any additional protection against dust and dirt. Each of the filters can be removed and cleaned with a cloth or vacuum cleaner (or simply rinsed under running water) – and you’ll do it in less time than it took you to read this description.1,000 points for looksWe respect closed PC cases – they hide components beautifully and match minimalist desks. But when you want to show off your epic components (or turn on ARGB inside), it\'s the tempered glass side that does the job. And it gives you an extra 1000 points for looks – that\'s why we put it in the Arx 700 ARGB.Everything in placeIf we were to describe the Arx 700 ARGB in a few words, we’d say that it\'s got everything in the right place. It\'s our biggest case (at least for now), so you can easily fit all your treasures in there. In such a space, they’ll feel like standing next to an open window.Or two – YOLO.The Arx 700 ARGB is 486×228×472 mm. That\'s plenty of room for everything you need to live win – including a tall cooling system (up to 179 mm), 8 fans (4 of which you get from us for a good start) and simultaneously two radiators up to 360 mm which guarantees efficient cooling of the most demanding builds.It’ll also fit virtually any graphics card available on the market (up to 410 mm) and power supply – you can place it in whatever position is most convenient for you. You can put it together in a flash, thanks in part to the special mounting frame. We tested it ourselves.ARGB-bright futureGood news! With our PC case, the ARGB-bright future awaits you. Literally – because with the Arx 700 ARGB, it only takes one click to create an epic aurora over your desk (the RESET button is responsible for the control). Some say it\'s because of the low temperature in the case – but the truth is that ARGB fans are spinning inside.They allow you to light up your PC the way you want. The 4 Stratus 140 PWM ARGB fans (pre-installed for your convenience) give you the option of any lighting configuration. You can set them up in an instant thanks to the built-in PWM and ARGB controllers – all combined into one functional package that is compatible with ENDORFY ARGB-labeled products (and compatible products from other manufacturers). This means that you can easily synchronize the backlight of the entire set based on the Arx 700 ARGB – even if it’s your very first build.Because your PC is meant to be for you, not the other way around.Maximum airflow inside the caseAiry mesh top and frontRoom for two radiators up to 360 mmSpacious interior

Kods: EY2A013

Korpusi

MPG VELOX 300R AIRFLOW PZ is designed for high thermal performance, versatile cooling, and effortless assembly—perfect for gaming enthusiasts building powerful rigs.MSI\'s premium MPG series is engineered for gamers who demand strong performance and sleek design. Each product showcases cutting-edge aesthetics and vibrant colors, reflecting MPG\'s commitment to exceptional design. With optimized configurations, MPG creates a visually striking and powerful gaming experience that leads the trends.pre-installed Exclusive Dual Layer Blades FanThe rigid dual-layer structure minimizes vibration and generates concentrated airflow, expanding the heat dissipation range.EXCLUSIVE DUAL LAYER BLADES FAN designDual Ring Blade DesignInterconnected fan blades enhance rigidity, reducing vibration for smooth operation. Dual-layer blades rotate at varying speeds, optimizing airflow and heat dissipation.ADJUSTABLE Fan SpeedThree manual fan speed control modes regulate voltage, enabling users to optimize cooling performance - maximize airflow, minimize noise, or achieve the ideal balance.Support three setting spaces for 360 mm radiators (Can be equipped with two 360 mm radiators simultaneously), up to thirteen fans, one Pump Reservoir, or one water cooling distro plateSupports regular EATX, ATX, Micro-ATX, Mini-ITX, and Back-connect ATX motherboards, meeting various PC build requirementsThe Dual Layer Blades Fan consists of outer and inner ring blades that rotate simultaneously, creating concentrated airflow and enhanced heat dissipationPre-installed with 2 x 160 mm ARGB Dual Layer Blades Fan at the front and 1 x 120 mm Dual Layer Blades Fan at the rearThe adjustable EZ bracket on the front panel supports fan sizes of 160mm x 2, 140mm x 3, and 120mm x 3, as well as a water cooling distro plate, allowing for flexible installationQuick snap-and-lock PSU cover for easy assembly and streamlined cable management, optimizing the building processSynergizes with compatible MSI motherboards through a USB 20Gbs (Type-C) port for high-speed data transmissionRemovable dust filters at the top, front, side, and bottom for easy cleaning

Kods: MPG VELOX 300R AIRFLOW PZ

Korpusi

Two Aspect 14 PWM fans preinstalled with room to expand up to a total of four 140 mm or six 120 mm fans

Kods: FD-C-NOR1C-03