Antenas un aksesuāri

nRayAIM-DH1 is an alignment and aiming attachment for the nRAY. Use it to attach a scope of your choice for even greater precision and easier installation of the Wireless Wire nRAY.

Kods: NRAYAIM-DH1

Antenas un aksesuāri

ANGLED COMPACT MOBILE ANTENNA. Frequency range 700 ~ 2700 MHz Polarization Linear (vertical) Gain 5.0 dBi VSWR 1.8 Impedance 50 Ω Connector type SMA Male (straight)

Kods: PR1US450

Antenas un aksesuāri

STRAIGHT COMPACT MOBILE ANTENNA. The Teltonika PR1CS450 is a compact, straight 4G/LTE mobile antenna designed for cellular connectivity. Primary Use It is used as a standard accessory for Teltonika RUT (e.g., RUT240, RUT955, RUTX11) and TRB series industrial routers and gateways. Common Applications IoT & M2M: Connecting sensors and controllers to the cloud. Space-Constrained Areas: Ideal for electricity cabinets, vending machines, and ATMs where large antennas won't fit. Indoor Setups: Used in locations with stable mobile coverage where an external wired antenna is unnecessary. Key Specifications Connector: SMA Male. Frequency: 698–2700 MHz (supports 4G/LTE, 3G, and GSM). Type: Straight, rigid design (no swivel).

Kods: PR1CS450

Antenas un aksesuāri

DINrail PRO is a mounting bracket for LtAP mini series products, designed to fit standard 35 mm × 7.5 mm DIN rails. This bracket will allow to install LtAP mini next to the industrial control equipment like water meters etc., as well as in equipment racks. Mounting bracket is made from metal and comes with a metal ring.

Kods: DRP-LTM

Antenas un aksesuāri

ACGPSA is standalone active GPS antenna, that works in 1575.4 MHz spectrum. Antenna size is 46.5 mm x 26.5 mm x 12.5 mm with IP67 rating and includes internal magnet and double sided tape, so it can easily be attached to various surfaces. It has a long 5m cable with an SMA connector, to be connected to LtAP mini via the ACSMAUFL pigtail (available for ordering separately)./ACGPSA is standalone active GPS antenna, that works in 1575.4 MHz spectrum. Antenna size is 46.5 mm x 26.5 mm x 12.5 mm with IP67 rating and includes internal magnet and double sided tape, so it can easily be attached to various surfaces. It has a long 5m cable with an SMA connector, to be connected to LtAP mini via the ACSMAUFL pigtail (available for ordering separately).

Kods: ACGPSA

Antenas un aksesuāri

Teltonika Wi-Fi Magnetic SMA Antenna , PR1KRF30 , Magnetic , Gain 3 dB , 2400-2500 GHz , Antenna connector type RP-SMA Male

Kods: PR1KRF30

Antenas un aksesuāri

Teltonika Mobile Communication Adhesive SMA Antenna , PR1AS420 , Gain 2 dB , Antenna connector type SMA Male

Kods: PR1AS420

Antenas un aksesuāri

HGO-LTE-W A handy IoT combo antenna for both LTE and LoRa frequencies. Perfect for the MikroTik KNOT LR series! No need to buy several antennas for your Internet-of-things setups – just grab the new HGO-LTE-W antenna that can handle an impressive frequency spectrum: 699MHz – 3,8GHz. That’s right – you can use the same antenna for LTE, CAT-M/NB and LoRa connectivity. This antenna will transmit whichever signal your modem provides. For example, if you are using our KNOT LR8/LR9 kit, you can use this powerful 1.5 – 4 dBi antenna to communicate with all your 868 MHz devices and then send the data to the cloud via LTE.

Kods: HGO-LTE-W

Antenas un aksesuāri

Dual-band 2.4GHz / 5 GHz screw-on outdoor antenna with RP-SMA female connectors. Provides 3.3 dBi gain for the 2.4 GHz band and 5.5-7.1 dBi gain for the 5 GHz band. Just add two of HGO-antenna-OUT to NetMetal ac² to have powerful Dual-Band Outdoor AP!

Kods: HGO-ANTENNA-OUT

Antenas un aksesuāri

The Teltonika PR1KSG30 is a compact, adhesive GNSS (GPS) antenna used to provide location and timing data to industrial networking devices. Where it is used: Vehicles: Stuck to dashboards or windows in trucks, buses, and campers for fleet tracking. IoT Enclosures: Mounted inside or on plastic control boxes for remote monitoring. Industrial Sites: Used at solar farms or weather stations for precise time synchronization. Key Details: Compatibility: Works with Teltonika routers (RUT955, RUT956, RUTX11, etc.) and gateways (TRB245). Mounting: Flat-surface adhesive (3M tape). Connection: 3-meter cable with a standard SMA Male connector. Systems: Supports GPS, GLONASS, Galileo, and BeiDou.

Kods: PR1KSG30

Antenas un aksesuāri

SCHNEIDER ELECTRIC CENTRAL PLATE R+TV+SAT WHITE

Kods: WDE002845

Antenas un aksesuāri

The LHG mount is a basic pole mount adapter for LHG series products. • Simple and low cost. • Supports all LHG series, products, including LHG XL. • Made from metal. • Package also includes a U-bolt and a K-58 mounting kit.

Kods: LHGMOUNT